Horstmann C-Stat ZW 설치 가이드

Installer Settings

There are a number of 'Installer Settings' that should be set on
installation.

These can be found under the 'SET UP MENU' on page 15 of
the user instructions.

The TPI Cycles setting and Optimum Start settings should be
carefully set on installation as this will affect system performance.

Clock Format

AM/PM or 24 Hour clock display - Default

setting AM/PM

Daylight saving

On or Off - Default setting ON for UK Market

Standby temperature

Frost protection setting – Default setting 5°C

Upper and Lower

Default settings 30°C and 5°C

Temperature limits

TPI Cycles

This setting will change according to the

type of boiler being used - Default setting 6

For Gas boiler this setting should be 6

cycles per hour

For Oil boilers this setting should be 3

cycles per hour

For Electric panel heaters this should be 12

cycles per hour

Optimum Start

On or Off – Default setting Off