Weber 475 지침 매뉴얼

DANGER

Do not use an open flame to ch e ck for gas

l e a k s . Be sure there are no sparks or open
flames in the area while you ch e ck for leaks.
This will result in a fire or explosion which
can cause serious bodily injury or death and
d a m age to pro p e rt y.

Remove control panel burner control knobs,
and front panel

Front edge of the
control panel

Put your fingers under the front edge of the control panel,
lift up, and pull evenly toward you. Figure 22 (a).

The control panel is separate from the front panel. The
control panel needs to be removed before the front panel
can be removed. Figure 21.

Figure 21

Figure 22

(a)

Front Panel

Control Panel

Control
panel

Front
panel

Pull the front panel up and out of the cooking box
assembly. Figure 23.

Figure 23

Front panel

CHECK FOR GAS LEAKS

WARNING: You should check for gas leaks every time
you disconnect and reconnect a gas fitting.

You will need: a soap and water solution and a rag or
brush to apply it.

Note: Since some leak test solutions, including soap and
water, may be slightly corrosive, all connections should be
rinsed with water after checking for leaks.

Warning: Make sure all burner control knobs are in
the OFF position, including the side burner, if the
barbecue has a side burner.

Turn on gas supply.

WARNING

The gas connections of your Weber Gas

Barbecue  have  been  factory  tested. We  do
h ow ever recommend that you leak ch e ck  all
gas  connections  before  operating  yo u r
Weber Gas Barbecue.

To regulator