Weber 475 지침 매뉴얼
14
REINSTALL CONTROL
PANEL
PANEL
You will need: control panel.
Pull igniter buttons up until they stay in the up position.
Place the control panel into the grooves on either side of
the front of the cooking box. Push the control panel into
place, using even pressure while pushing. Figure 26 (a).
Place the control panel into the grooves on either side of
the front of the cooking box. Push the control panel into
place, using even pressure while pushing. Figure 26 (a).
Use your fingers to lift the front edge of the control panel
slightly and set it into the recess on both sides of the
cooking box. Figure 26.
slightly and set it into the recess on both sides of the
cooking box. Figure 26.
Figure 26
(a)
Front Panel
Control Panel
R E I N S TALL FRONT PA N E L
You will need: front panel.
With the Weber logo to the left, slide front panel down
into place. Figure 25.
into place. Figure 25.
Figure 25
To regulator
To regulator