Whirlpool WFG520S0AW 빠른 설정 가이드
12
If flame needs to be adjusted:
1. Loosen the lock screw on the air shutter located at the rear of
the broil burner.
2. Adjust the air shutter as needed.
3. Tighten lock screw.
3. Tighten lock screw.
4. Press CANCEL/OFF when finished.
Warming Drawer or Premium Storage
Drawer
(on some models)
Remove all items from inside the warming drawer or premium
storage drawer, and allow the range to cool completely before
attempting to remove the drawer.
storage drawer, and allow the range to cool completely before
attempting to remove the drawer.
To Remove:
1. Open the warming drawer or premium storage drawer to its
fully open position.
2. Using a flat-blade screwdriver, gently loosen the warming
drawer or premium storage drawer from the glide alignment
notch and lift up the drawer alignment tab from the glide.
notch and lift up the drawer alignment tab from the glide.
3. Repeat Step 2 on the other side. The warming drawer or
premium storage drawer is no longer attached to the drawer
glides. Using both hands, pick up the warming drawer or
premium storage drawer to complete the removal.
glides. Using both hands, pick up the warming drawer or
premium storage drawer to complete the removal.
To Replace:
1. Align the forward drawer notches with the notches in the
drawer glides on both sides. Place the rear alignment tabs into
the drawer glides on both sides.
the drawer glides on both sides.
2. Push the warming drawer or premium storage drawer in all the
way.
3. Gently open and close the warming drawer or premium storage
drawer to ensure it is seated properly on the glides on both
sides.
sides.
Storage Drawer
(on some models)
The storage drawer can be removed. Before removing, make sure
drawer is cool and empty.
drawer is cool and empty.
To Remove:
1. Pull the storage drawer straight back to the drawer stop.
2. Lift up the front of the drawer and pull the drawer out.
A. Lock screw
B. Air shutter
B. Air shutter
A. Flat-blade screwdriver
B. Drawer alignment tab
B. Drawer alignment tab
C. Drawer glide notch
A
B
A
B
C
A. Drawer alignment tab
B. Drawer glide notch
B. Drawer glide notch
A. Drawer stop notch
A
B
A