Intel Atom Processor N270 AU80586GE025D 데이터 시트
제품 코드
AU80586GE025D
Electrical Specifications
26
Datasheet
Table 6. Processor Absolute Maximum Ratings
Symbol Parameter
Min
Max
Unit
Notes
1,5
T
STORAGE
Processor Storage Temperature
-40
85
°C 2
V
CC, VCCP
Any Processor Supply Voltage with
Respect to V
Respect to V
SS
-0.3 1.10 V
1
VinAGTL+
AGTL+ Buffer DC Input Voltage
with Respect to V
with Respect to V
SS
-0.1 1.10 V
1,
2
VinAsynch_CMOS
CMOS Buffer DC Input Voltage with
Respect to V
Respect to V
SS
-0.1 1.10 V
1,
2
NOTES:
1.
This rating applies to the processor and does not include any tray or packaging.
2.
Contact Intel for storage requirements in excess of one year.
3.10
Processor DC Specifications
The processor DC specifications in this section are defined at the processor core
(pads) unless noted otherwise. See Chapter 4 for the pin signal definitions and signal
pin assignments. Most of the signals on the FSB are in the AGTL+ signal group. The
DC specifications for these signals are listed in Table 9. DC specifications for the CMOS
group are listed in Table 10.
Table 9 through Table 11 list the DC specifications for the processor and are valid only
while meeting specifications for junction temperature, clock frequency, and input
voltages. The Highest Frequency Mode (HFM) and Lowest Frequency Mode (LFM) refer
to the highest and lowest core operating frequencies supported on the processor.
Active mode load line specifications apply in all states except in the Deep Sleep and
Deeper Sleep states. V
CC,BOOT
is the default voltage driven by the voltage regulator at
power up in order to set the VID values. Unless specified otherwise, all specifications
for the processor are at T
J
= 90°C.
Note: Care should be taken to read all notes associated with each parameter.