Intel Atom Processor N270 AU80586GE025D Ficha De Dados

26  

 Datasheet 

T

STORAGE

 

Processor Storage Temperature 

 -40 

 85 

°C 2 

V

CC, VCCP

 

Any Processor Supply Voltage with 
Respect to V

SS

 

-0.3 1.10  V 

1 

VinAGTL+ 

AGTL+ Buffer DC Input Voltage 
with Respect to V

SS

 

-0.1 1.10  V 

1, 

2 

VinAsynch_CMOS 

CMOS Buffer DC Input Voltage with 
Respect to V

SS

 

-0.1 1.10  V 

1, 

2 

NOTES:  

1. 

This rating applies to the processor and does not include any tray or packaging.  

2. 

Contact Intel for storage requirements in excess of one year. 

The processor DC specifications in this section are defined at the processor core 

(pads) unless noted otherwise. See Chapter 4 for the pin signal definitions and signal 

pin assignments. Most of the signals on the FSB are in the AGTL+ signal group. The 

DC specifications for these signals are listed in Table 9. DC specifications for the CMOS 

group are listed in Table 10. 

Table 9 through Table 11 list the DC specifications for the processor and are valid only 

while meeting specifications for junction temperature, clock frequency, and input 

voltages. The Highest Frequency Mode (HFM) and Lowest Frequency Mode (LFM) refer 

to the highest and lowest core operating frequencies supported on the processor. 

Active mode load line specifications apply in all states except in the Deep Sleep and 

Deeper Sleep states. V

CC,BOOT 

is the default voltage driven by the voltage regulator at 

power up in order to set the VID values. Unless specified otherwise, all specifications 

for the processor are at T

J

 = 90°C.  

Note:  Care should be taken to read all notes associated with each parameter.