Bosch NIT5665UC 사용자 매뉴얼
14
Child lock
You can use the child lock to prevent children from
accidentally turning the cooktop on.
Turning the child lock on
The cooktop must be turned off.
Touch Clean Lock/Child Lock until a beep sounds and
The cooktop must be turned off.
Touch Clean Lock/Child Lock until a beep sounds and
the
D
indicator lights up. The cooktop is now locked.
After some time, the
D
indicator will go out.
Turning the child lock off
Touch Clean Lock/Child Lock until a beep sounds and
Touch Clean Lock/Child Lock until a beep sounds and
the
D
indicator turns off. The child lock is now
deactivated. The cooktop can be switched on.
9
CAUTION
The child lock may be accidentally turned on and off
due to:
▯
water spilled during cleaning
▯
food that has overflowed
▯
objects being placed on the Clean Lock/Child
Lock touch key.
Automatic child lock
With this function, the child lock is automatically activated
With this function, the child lock is automatically activated
whenever you switch off the cooktop.
Turning on and off
See "Basic settings" section.
See "Basic settings" section.
Clean Lock
Cleaning the control panel while the cooktop is on may
change the settings.
In order to avoid this the cooktop has a Clean Lock
In order to avoid this the cooktop has a Clean Lock
function. Touch Clean Lock/Child Lock. The
>
indicator
appears. The control panel is locked for approximately
35 seconds. You can now clean the surface of the
control panel without risk of changing the settings.
After the time has elapsed a beep will sound. The Clean
After the time has elapsed a beep will sound. The Clean
Lock is deactivated.
The Clean Lock function does not affect the main switch.
The Clean Lock function does not affect the main switch.
You can turn off the cooktop at any time.
Automatic time limitation
If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating.
The element stops heating.
”‰
and the residual heat
indicator
•
/
œ
flash alternately in the display.
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).
Basic settings
The device has various basic settings. These settings
may be adapted to the user's individual needs.
Display
Function
™‚
Automatic child lock
‹
Off*
‚
On
™ƒ
Sound signals
‹
Confirmation beep and error signal off
‚
Only confirmation beep off
ƒ
All signals on*
™†
Automatic timer
‹
Off*
‚
-
ŠŠ
Automatic shut-off time
™‡
Duration of the timer end signal
‚
10 seconds*
ƒ
30 seconds
„
1 minute
*Factory settings