Bosch NIT5665UC 사용자 매뉴얼
15
Changing the basic settings
The cooktop should be turned off.
The cooktop should be turned off.
1.
Turn on the cooktop with the main switch.
2.
Within the next 10 seconds, touch the Timer key until
you hear a sound signal.
™‚
lights up on the left side
and
‹
on the right side of the display.
3.
Touch the Timer key until the indicator for the required
function is displayed.
4.
Select the required setting using the number keys. The
new setting will be displayed in the element display on
the upper right-hand side.
5.
Touch the Timer key again for 4 seconds, until you
hear a sound signal. The settings have been correctly
stored.
Leaving the basic settings
Turn off the cooktop with the main switch.
Turn off the cooktop with the main switch.
Cleaning and Maintenance
Daily Cleaning
Note: Recommended cleaners indicate a type of cleaner
and do not constitute an endorsement of a specific
brand.
Glass ceramic cooktop
9
CAUTION
Do not use any kind of cleaner on the glass while
the surface is hot, use only the razor blade scraper.
The resulting fumes can be hazardous to your
health. Heating the cleaner can chemically attack
and damage the surface.
Clean the surface when it is completely cool with the
following exception: remove dry sugar, sugar syrup,
tomato products and milk immediately with the razor
blade scraper (see special care chart).
Wipe off spatters with a clean, damp sponge or a paper
Wipe off spatters with a clean, damp sponge or a paper
towel. Rinse and dry. Use white vinegar if smudge
remains; rinse.
Apply a small amount of the glass ceramic cooktop
Apply a small amount of the glass ceramic cooktop
cleaner. When dry, buff surface with a clean paper towel
or cloth.
™ˆ
Power Management function
‹
= Off*
‚
= 1,000 W. minimum power
‚
.= 1,500 W
ƒ
= 2,000 W
etc.
Š
or
Š
. = maximum power of the element
™Š
Element selection time
‹
Unlimited: the last programmed element remains selected*
‚
Limited: The element will only remain selected for 10 seconds
™‹
Restoring default cooktop settings
‹
Customized settings*
‚
Return to factory settings
Display
Function
*Factory settings