Wacom PenPartner - USB for Windows & Macintosh 사용자 설명서

     Page  38

4. Now, without applying pressure to the pen tip, press the side switch; the status LED should again 

change from orange to green.

5. Turn the pen over; the status LED should change from orange to green when the eraser enters 

proximity.

If any of the above tests failed, you may have a defective pen or tablet.  See 

.

If your PenPartner tablet is not working, see the sections below: Checking USB cable connection(s), 
Macintosh, 

Make sure your computer is turned on, the operating system has finished loading, and PenPartner is 
properly connected to an active USB port.  Then try the following tests:

1. PenPartner’s status LED will light whenever the tablet is connected to an active USB port and your 

computer has recognized it as a USB device.  If the LED is off, try the following:
•

Make sure the USB cable is securely connected to a USB port.

•

If you are connecting the tablet to a USB hub (or hub device such as a monitor with USB ports), be 
sure the USB hub is properly connected to your computer and is active.

2. If the tablet’s status LED does not illuminate after your computer is on and has finished booting up, 

your USB port may be inactive.   See