Wacom PenPartner - USB for Windows & Macintosh 사용자 설명서

     Page  39

If the tablet LED does not light, your computer may not have the necessary USB software installed, or may 
not be configured properly.

•

If you have an iMac, you will need Macintosh OS 8.5, Mac OS ROM 1.2.1, and iMac Update 1.1 
(located on the PenPartner CD-ROM).

•

If you added a USB interface card you must also install system software to support the USB card.

•

Otherwise, if your computer came from the factory with a USB port installed, it should be USB ready.

•

Plug in another USB device to verify that the USB port is functional.

1. Check the PenPartner status LED.  If the LED is on, PenPartner has been registered as a USB device; 

continue with step 2.
•

If the LED is off, make sure all USB cables are securely connected to an active USB port.

•

Connect PenPartner into a different USB port or try connecting PenPartner to the USB port on 
another computer.

•

Verify that your computer is USB ready.  The LED will not light without the proper USB hardware 
and software.

2. Move the UltraPen across the active area of the tablet; the screen cursor should move in the 

corresponding direction on your monitor.

3. Test the UltraPen by pressing the pen tip against the surface of the tablet; the status LED on the tablet 

should change from orange to green.