Sony Water Dispenser 2 사용자 설명서

237

Setup Relating to Switcher Processor

  

Ch
apt

er 16 

E

ngin

eering Se

tup

In each of the <Key1> to <Key4> groups, select [Enable] or [Disable].

You can make this setting at any time, regardless of the operation mode.

In the Switcher>Config menu, press [K-PVW Config].

The K-PVW Config menu appears.
The status area shows the key preview configuration for each bank.

Using either of the following methods, select the key preview to which the 
settings apply.

• Press directly on the list appearing in the status area to make the 

selection.

• Press the arrow keys to scroll the reverse video cursor.

The selected key preview appears in reverse video.

In the <Mode> group, select [Video] mode or [Key] mode.

If you select Key mode, skip to step 

.

In the <Bkgd> group, select the background.

In standard mode or Multi Program mode, select [Clean] or [Utility2], then 
skip to step 

.

In DSK mode, select any of [Bkgd1] to [Bkgd4].

In DSK mode, turn the knobs to select the background signal.

a) 1 to 6: M/E1 OUT1 to 6

7 to 12: M/E2 OUT1 to 6
13 to 18: M/E3 OUT1 to 6

In the <Key 1> to <Key 4> groups, select the corresponding key status 
from the following.

Link: Follow the on/off link setting.
On: Key is always on.
Off: Key is always off.

2 to 5

Bkgd1 to 4

Background signal selection

1 to 18

 a)