Yaesu FT-450D 사용자 설명서
Page 93
FT-450D O
PERATION
M
ANUAL
I
NSTALLATION
OF
O
PTIONAL
A
CCESSORIES
A
CTIVE
-T
UNING
A
NTENNA
S
YSTEM
(ATAS-100/-120/120A) O
PERATION
M
ANUAL
T
UNING
1. Press the [TUNE] button briefly to activate the
Automatic Antenna Tuner.
The “
The “
” icon will appear in the display.
If the transceiver frequency is out of the amateur
band, the “
band, the “
” icon will not appear.
If the antenna SWR is High (more than 1:2.0), the
“
“
” icon will blink.
2. Press and hold in the microphone PTT switch.
With the transceiver in the “transmit” mode, press
and hold in the [BAND
and hold in the [BAND
] button (to raise the an-
tenna) or the [BAND
] button (to lower the an-
tenna). While you hold in one of these keys, the
FT-450D will generate a carrier, and you may
watch the SWR meter of the FT-450D, looking for
the meter indication to reach its minimum value.
When this is reached, release the [BAND
FT-450D will generate a carrier, and you may
watch the SWR meter of the FT-450D, looking for
the meter indication to reach its minimum value.
When this is reached, release the [BAND
] or
[BAND
] button, then release the PTT switch to
return to the “receive” mode.
[TUNE] button
AT
A
S
-1
20
A
FT-450D
INPUT
DC 13.8V
22A
ANT
GND
EXT
SPKR
CAT
LINEAR
TUNER
DATA
After-market mount