Yaesu FT-450D 사용자 설명서

Page 95

FT-450D O

PERATION

 M

ANUAL

I

NSTALLATION

 

OF

 O

PTIONAL

 A

CCESSORIES

M

OUNTING

 B

RACKET

 MMB-90 I

NSTALLATION

The MMB-90 is a mounting bracket designed to match the YAESU FT-450D transceiver.

Parts List

Mounting Bracket ........................................................ 1 pc
Double Face Adhesives ............................................ 2 pcs
Screws, Washers & Nuts for Mounting Bracket

M4 Knob-screws .................................................. 4 pcs
M5X20 Screws ..................................................... 4 pcs
M5X20 Tapping screws ........................................ 4 pcs
Washers ............................................................... 8 pcs
Washers ............................................................... 4 pcs
N5 Nut .................................................................. 4 pcs

Installation Procedure

1. Determine a convenient mounting location with

sufficient clearance and ventilation. Use the
bracket as a template and locate the mounting
holes. Use a 4.8-mm (3/16#) bit to drill the holes.
Secure the bracket with the supplied screws,
washers and nuts.

N

OTE

:

The supplied double-sided adhesive tape may be
used to temporarily hold the mobile mounting
bracket in place, while drilling the holes for instal-
lation.

Stay (user prepared)

2. Position the transceiver in the bracket so the holes

in the side are aligned with those in the bracket.
Fasten the transceiver into place using the sup-
plied Knob-screws (M4).

Upper side

Lower side

M4 Knob-screws
(4 pcs)