Visioneer DP1011 사용자 설명서

1. Make sure the projector and computer are turned off.

2. Connect one end of the VGA cable to the projector. Connect 

the other end to the VGA port on the computer.

3. Connect the projector to the other video source(s) with the 

appropriate cable(s).

4. Plug the power cord into the back of the projector and then into 

an electrical outlet.

5. Turn on the projector first, and then the computer.

Video Output

S-Video Output

VGA Cable

Power Cord

S-Video Cable

Composite Video Cable

Your DP1011 projector works best at computer screen 

resolutions of 1024 x 768 or less. To reset the computer screen 
resolution,  see “Setting the Screen Resolution” on page 28.