Visioneer DP1011 사용자 설명서

1. Press the Power button on the projector or Remote Control to 

turn off the projector lamp.

An on-screen message appears: Power off the lamp?

2. Press the Power button again to confirm.

If you don’t press the button again within five seconds, the 
message disappears and the lamp remains lit. This convenient 
design is in case you accidently press the Power button in the 
middle of a show and do not want to turn off the projector.

If you do press the Power button a second time, the 
Power/Standby indicator flashes 

orange

 for about 40 seconds. 

Then the projector automatically shuts itself down.

3. To turn on the projector again, press the Power button within 

40 seconds of the indicator flashing.

4. Disconnect the power cord.

•

If the Warning indicator turns 

red

, the projector has overheated. 

The projector will automatically shut itself down.

•

A Warning indicator flashing 

red

 (0.5 second intervals), 

indicates a problem with the lamp. Turn off the projector and 
disconnect the power cord from the electrical outlet, then 
contact your local dealer or our service center.

•

A Warning indicator flashing 

red

 (1 second intervals), indicates 

an internal problem. Turn off the projector and disconnect the 
power cord from the electrical outlet, then contact your local 
dealer or our service center.

•

A Warning indicator flashing 

orange

, indicates high-speed 

cooling in progress. This is not an abnormal condition, and you 
can continue using the projector.

Do not turn off the projector immediately following a 

power off procedure. Let it cool down first.

Warning Indicator