Visioneer DP1011 사용자 설명서

1. Lift the projector up and press the elevator button.

The elevator foot pops out.

2. Press the elevator button and hold it in while raising the 

projector to the display angle you want, then release the 
elevator button to lock the elevator foot in position.

3. Rotate the tilt adjust wheel to fine-tune the display angle. The 

tilt adjust wheel is only on the back foot diagonally opposite the 
lens.

1. Hold the projector with one hand, then press and hold down the 

elevator button.

2. Lower the projector, then release the elevator button to lock the 

elevator foot in position.

3. Rotate the tilt adjust wheel to fine-tune the display angle. 

The projector is equipped with an “elevator foot” for 

adjusting the projector height.

When placing the projector in its carrying case, please 

first retract the elevator foot and tilt adjust wheel to avoid 
breakage.

Elevator Foot

Elevator Button

Tilt Adjust Wheel