Visioneer DP1011 사용자 설명서

1. Press the Menu button on the Remote Control or Panel Control 

to open the OSD.

2. Select the Management menu and press the Enter button.

The Management menu appears.

3. Use the     keys to select the item you want, and use the

   keys to adjust the selected setting.

4. When the new settings are what you want, press the Menu 

button again.

Menu Location—Sets the location of the menus on the screen.

•

Front-Desktop—Projects onto an image in front of the 
projector. The factory default setting.

•

Rear-Desktop—Projects a reversed image so you can project 
from behind a translucent screen.

•

Front-Ceiling—Projects an image turned upside down for 
ceiling-mounted projection.

•

Rear-Ceiling—Projects a reversed image turned upside down 
for ceiling-mounted projection from behind a translucent 
screen.

Lamp Hour—Displays the lamp’s elapsed operating time (in 
hours).

Reset Lamp Hours—Resets the lamp’s elapsed operating time. 
Reset this option only after installing a new lamp.

Reset This Menu—Resets the projector’s display settings to their 
original factory settings. Select Yes to reset the menu.

Machine Reset—Resets the projector’s settings (except Lamp 
Hours) on all menus to their original factory settings. Select Yes to 
reset all menus.