Viewsonic WR100 사용자 설명서
ViewSonic Wireless Router
18
3
The Primary Setup screen:
Host Name: if requested by your ISP (usually cable
ISPs). Otherwise, leave this field blank.
ISPs). Otherwise, leave this field blank.
Domain Name: if required by your ISP. Otherwise, leave
this field blank.
this field blank.
Connection Type: Click the down arrow for a drop-down
menu with several Connection Types. IMPORTANT! The
Primary Setup screen displays different features
depending on which Connection Type you select. Select
one of the following:
menu with several Connection Types. IMPORTANT! The
Primary Setup screen displays different features
depending on which Connection Type you select. Select
one of the following:
• Dynamic IP Setting - DHCP (Automatic
Configuration). If you are connecting through DHCP or
a dynamic IP address from your ISP, keep this default
setting.
a dynamic IP address from your ISP, keep this default
setting.
• Static IP Address. If your ISP assigns you a Static IP
Address, select Static IP Address. More fields appear
below Connection Type. Enter the Internet IP Address,
Subnet Mask, Default Gateway, and enter at least one
DNS address.
below Connection Type. Enter the Internet IP Address,
Subnet Mask, Default Gateway, and enter at least one
DNS address.
• PPPoE (for DSL). If you are connecting through
PPPoE, select PPPoE from the drop-down menu.
Complete the User Name and Password fields.
Complete the User Name and Password fields.
Continued.....
Goes to the screen to select one of
the following Security modes:
- WEP
- WPA Pre-Shared
- WPA Radius
the following Security modes:
- WEP
- WPA Pre-Shared
- WPA Radius