Viewsonic WR100 사용자 설명서
ViewSonic Wireless Router
19
Wireless: Mode: click the down arrow for the drop-down menu
with a list of wireless networking modes. Select one of the
following modes based on your environment setting:
with a list of wireless networking modes. Select one of the
following modes based on your environment setting:
• Disable: To disable wireless networking for 802.11g and
802.11b, select Disable.
• 11b+g: If you have 802.11b and 802.11g devices in your
network, then keep the default setting, 11b+g.
• 11g Only: If you have only 802.11g devices, select 11g Only.
• G Plus*: This mode requires the same technology from the
client devices.
* Important! When operating at highest speeds, this Wi-Fi
device achieves an actual throughput of up to 34 Mbps, which
is the equivalent throughput of a system following 802.11g
protocol and operating at a signaling rate of 125 Mbps.
is the equivalent throughput of a system following 802.11g
protocol and operating at a signaling rate of 125 Mbps.
Channel: customize as needed. It is recommended that you
change the channel to prevent interference with other wireless
routers in the vicinity.
change the channel to prevent interference with other wireless
routers in the vicinity.
SSID: customize as needed. This field automatically defaults to
ViewSonic when 11b+g is selected in the previous Mode field.
For added security, change viewsonic in the SSID to a unique
name.
ViewSonic when 11b+g is selected in the previous Mode field.
For added security, change viewsonic in the SSID to a unique
name.
Security: to enable Security, (recommended), select Enable.
Configure Security: click Configure Security. The Configure
Security screen appears as shown in the next step.
Security screen appears as shown in the next step.