United States Stove 5520 사용자 설명서
6
Fuel Burn Rate* (lowest setting)
1.0 lbs./hr. (0.5 kg/hr)
Burn Time (lowest setting)
120 hrs. (approximate)
Hopper Capacity
120 lbs. (55kg)
Heating Specifi cations
Height
34 in. (864mm)
Width
26 in. (660mm)
Depth
27 in. (686mm)
Weight
210 lbs. (95.5kg)
Dimensions
Electrical Rating
110-120 volts, 60 HZ, 3.0 Amps
Watts (operational)
175 (approx.)
Watts (igniter running)
425 (approx.)
Electrical Specifi cations
FUEL CONSIDERATIONS
Your pellet stove is designed to burn premium hardwood pellets that comply with Association of Pellet Fuel Industries
standards. (Minimum of 40 lbs density per cubic ft, 1/4” to 5/16” diameter, length no greater than 1.5”, not less than
8,200 BTU/lb, moisture under 8% by weight, ash under 1% by weight, and salt under 300 parts per million). Pellets that
are soft, contain excessive amounts of loose sawdust, have been, or are wet will result in reduced performance.
standards. (Minimum of 40 lbs density per cubic ft, 1/4” to 5/16” diameter, length no greater than 1.5”, not less than
8,200 BTU/lb, moisture under 8% by weight, ash under 1% by weight, and salt under 300 parts per million). Pellets that
are soft, contain excessive amounts of loose sawdust, have been, or are wet will result in reduced performance.
Store your pellets in a dry place. DO NOT store the fuel within the installation clearances of the unit or within the space
required for refueling and ash removal. Doing so could result in a house fi re.
required for refueling and ash removal. Doing so could result in a house fi re.
SAFETY AND EPA COMPLIANCE
Your pellet stove has been approved for installation in the USA and Canada. It may also be installed in a manufactured
or mobile home. It has been safety tested and listed to ASTM E 1509-04, ULC-S627-00, ULC/ORD C1482-90, and(UM)
84-HUD by INTERTEK Testing Services in Fairview, Oregon USA.
or mobile home. It has been safety tested and listed to ASTM E 1509-04, ULC-S627-00, ULC/ORD C1482-90, and(UM)
84-HUD by INTERTEK Testing Services in Fairview, Oregon USA.
* Pellet size may effect the actual rate of fuel feed and burn times. Fuel feed rates may vary by as much as 20%. Use PFI listed fuel for best results.
Specifi cations