Uniden BC95XLT 사용자 매뉴얼

45

direction upward. Frequencies appear during the 
search.

Notes:
•

You can set the delay function on or off during 
the search or while the search stops.

•

You can skip a frequency when the search stops. 
After the search skip frequency is set, the scan-
ner starts direct search again.

To stop searching during direct entry search, press 
Hold. 

 appears. In this mode, pressing Func 

+   changes the search direction downward and 
pressing Func +   changes the search direction 
upward.   or    appears depending on the search 
direction.

Press Func +   to decrease the frequency by one 
step or Func +    to increase it by one step. Hold 
down     or   for about 1 second to quickly 
increase or decrease the frequency.

To resume direct search, press Func + Src or Hold. 

 or   appears on the display, showing the search 

direction.

Follow these steps to store frequencies received 
during direct entry search mode or direct entry 
search hold mode.

1. Press Func + Pgm in direct entry search mode 

or direct entry search hold mode. The frequency 
and lowest blank channel alternate on the 

 

display.