Siemens Webcam TP177B 사용자 설명서
Automation and Drives - SCE
T I A Training Document
Page 30 of 129
Module
F6
Issued: 02/2008
Operator Control with WinCC flexible 2005
Preface Installation Project Description Step7 Projekt HMI Station WinCC flexible Project Messages Recipes User Management
4.5.6
Manual Operation FC20
Create a new network and drag the FC20 from the library to Network 7.
This block contains the manual operation of the tanks’ outflow valves in the manual mode.
This FC20 has to be called after the FB15, since the automatic valve operations of the FB15 have to
be overwritten by the manual mode in FC20.
Wire the inputs of the block.
Create a new network and drag the FC20 from the library to Network 7.
This block contains the manual operation of the tanks’ outflow valves in the manual mode.
This FC20 has to be called after the FB15, since the automatic valve operations of the FB15 have to
be overwritten by the manual mode in FC20.
Wire the inputs of the block.
Manual mode of the outflow valves of the tanks