Siemens Boating Equipment M200D 사용자 설명서
Functions
3.6 Motor protection
M200D AS-Interface Basic
Manual, 03/2009, A5E01668085-01
Manual, 03/2009, A5E01668085-01
25
3.6
Motor protection
3.6.1
Thermal motor model
Description
The approximate temperature of the motor is calculated using the measured motor currents
and device parameters "Rated operating current" and "Tripping class". This indicates
whether the motor is overloaded or functioning in the normal operating range.
Motor protection shutdown response
You use this device parameter to specify how the motor starter is to respond in an overload
situation:
● Shutdown without restart (AUTO RESET = off)
● Shutdown without restart (AUTO RESET = off)
Following an overload situation, the shutdown command cannot be reset until the motor
model has fallen below the reset threshold and after a reset command has been issued
(trip reset).
● Shutdown with restart (AUTO RESET = on)
WARNING
Motor restarts automatically if AUTO RESET is on.
Can Cause Death, Serious Injury, or Property Damage
The motor starter restarts automatically after the recovery time if a start command is
The motor starter restarts automatically after the recovery time if a start command is
present (autoreset). (autoreset).
Make sure that you take appropriate measures to exclude the risk of hazardous conditions.