Siemens Boating Equipment M200D 사용자 설명서

 

Functions 

 

3.6 Motor protection 

M200D AS-Interface Basic 
Manual, 03/2009, A5E01668085-01 

27

 

Prewarning limit for motor heating   

The motor starter also assumes a prewarning role, that is, it issues a warning if the motor 

temperature limit is exceeded. The prewarning limit for the M200D AS-i Basic is 90 % of the 

motor heating value. The motor is shut down at 100 %. 
The alarm can be read via Diagnostics via parameter channel (parameter echo) (Page 84) 

for the starter. 

Settings 

 

Device parameter 

Default setting 

Setting range 

Motor protection shutdown 

response 

Shutdown without restart 

• 

Shutdown without restart 

• 

Shutdown with restart 

Trip class 

CLASS 10 

• 

CLASS 10 

• 

CLASS OFF 

3.6.2 

Temperature sensor 

Description 

Temperature sensors are used to directly monitor the motor winding temperature. This 

indicates whether the motor is overloaded or functioning normally. If temperature sensors 

are installed in the motor stator winding (order option for the motor), the M200D motor starter 

can use these to monitor the motor. 
M200D motor starters can evaluate one temperature sensor circuit. 

Temperature sensor    

You can activate or deactivate this parameter depending on whether or not a temperature 

sensor is installed in the motor. The setting is made by means of the DIP switch on the 

device. 
Two types of temperature sensor are supported: 
●  Thermoclick. 

This is a switch that opens at a certain winding temperature. 

●  PTC type A. 

This is a PTC thermistor with a characteristic to IEC 60947-8. 

When the PTC type A temperature sensor is active, temperature sensor monitoring is also 

activated (see below).