Sears Cordless Drill 315.11485 사용자 설명서

12

n

  Make sure the latches on each side of your battery 

pack snap in place and battery pack is secured in drill 
before beginning operation.

 

CAUTION: 

When placing battery pack in your drill, 

be sure raised rib on battery pack aligns with groove 
inside drill and latches snap into place properly. 
Improper assembly of battery pack can cause damage 
to internal components.

n

  Lock switch trigger on your drill by placing the direction 

of rotation selector in center position. See Figure 5.

n

  Locate latches on side of battery pack and depress to 

release battery pack from your drill. See Figure 4.

n

  Remove battery pack from your drill.

See Figure 2.
To turn your drill

 ON, depress the switch trigger. To turn it 

OFF, release the switch trigger.

n  

Lock switch trigger on your drill by placing the direction 
of rotation selector in center position. See Figure 5.

n  

Place battery pack in your drill. Align raised rib on 
battery pack with groove inside drill. See Figure 4.

Fig. 4

Fig. 2

This tool has a variable speed switch that delivers higher 
speed and torque with increased trigger pressure. Speed  is 
controlled by the amount of switch trigger depression.
Note: You might hear a whistling or ringing noise from the 
switch during use. Do not be concerned, this is a normal 
part of the switch function.

See Figure 3.
Your drill has a two-speed gear train designed for drilling 
or driving at LO (1) or HI (2) speeds. A slide switch is 
located on top of your drill to select either LO (1) or HI (2) 
speed. When using drill in the LO (1) speed range, speed 
will decrease and unit will have more power and torque. 
When using drill in the HI (2) speed range, speed will 
increase and unit will have less power and torque. Use LO 
(1) speed for high power and torque applications and HI 
(2) speed for fast drilling or driving applications.

Fig. 3