SBE HighWire HW400c/2 사용자 설명서
HighWire HW400c/2 User Reference Guide Rev 1.0
The Link/Activity/Speed LED indication is as follows:
n when the network link is up
• blinking at 3 Hz for 10 Mb/s Tx or Rx;
or 1000 Mb/s Tx or Rx.
An optional front panel 2-high LED is provided as a status indicator for the Ethernet
re shown as LEDs C and D in Figure 3, and by default are
not present. The left LED indicates Link/Activity/Speed and the right LED indicates
ollision detection for the selected port. A port is selected by setting the appropriate
on setting the LED modes.
• solid gree
• blinking at 6 Hz for 100 Mb/s Tx or Rx;
• blinking at 12 Hz f
• blinking at 12 Hz f
ports. The optional LEDs a
C
CPLD bit. The default selection (when present) is the Marvell MV64462 System
Controller MAC.
See Section 4.2 for details
CPLD bit. The default selection (when present) is the Marvell MV64462 System
Controller MAC.
See Section 4.2 for details
October 10, 2006
Copyright 2006, SBE, Inc.
Page
31