Peugeot v-clic 매뉴얼
MISCELLANEOUS OPERATIONS
31
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Reassembly:
- Install the springs (3) as shown.
- Install the brake pads (4) oriented as shown
- Install the brake pads (4) oriented as shown
(flat side (5) oriented towards the rear of the
yoke).
yoke).
Note: When refitting the brake pads, push
the piston all the way into its hou-
sing.
sing.
Note: After refitting, actuate the brake
levers several times to bring the
brake pads against the brake disc.
brake pads against the brake disc.
Removal of the fork.
Replacing the bearings of the steering
system.
- Removal of the front wheel (see page 29).
- Removal of the front mudguard (see
- Removal of the front mudguard (see
procedure 8).
- Removal of the calliper (see page 30).
- Removal of the front top cover panel (see
- Removal of the front top cover panel (see
procedure 7).
- Remove the 3 fixing bolts (1).
- Remove the fastening screw (2).
- Remove the handlebar front and rear covers.
- Remove the handlebars from the fork tube.
- Remove the fastening screw (2).
- Remove the handlebar front and rear covers.
- Remove the handlebars from the fork tube.
- Remove the handlebars from the fork tube.
- Remove the steering locknut (1) (1).
- Remove:
- Remove the steering locknut (1) (1).
- Remove:
-
The lock washer (2).
-
the adjustable cone (3).
- Remove the fork.
- Remove the balls.
- Remove the balls.
3
4
5
1
2
3
2
1