Troy-Bilt 24A-070F768 사용자 설명서

�

�

NOTE: The bag must be removed before installing the 
blower chute.

8.  a. Grasp blower chute with one hand and slide locking 

rod on mounting bracket with other hand toward 
engine. Use the end of mounting bracket as lever-
age when sliding the locking rod. See Figure 8.

  b. Slip blower chute over rim of discharge opening 

and release locking rod to secure chute in place.

  c.  Raise the nozzle height to the highest setting when 

using the blower chute. Refer to nozzle height 
adjustment in the MAINTENANCE section on page 
16.

NOTE: The bag/chute switch button attached to the 
mounting bracket must be fully depressed by the tip of 
front tab on the blower chute or engine will not start.

NOTE: The bag must 
be removed before 
installing the blower 
chute.