Transcend Information T.sonicTM 820 820 사용자 설명서
18
Record using the External Microphone
1.
In the REC INPUT DEVICE Mode select Ext MIC (External Microphone) as the recording device.
2.
Plug an External Microphone into the T.sonic
™
820
’s Line-In port.
3.
Press and Hold the “RECORD” button
for more than 2 seconds to begin an audio recording
using the External Microphone.
4.
A Recording file is generated and will appear on the screen; this file is saved in the RECORD Mode in
the [/MICIN.DIR/] folder.
5.
Files Recorded using an External Microphone are named in the order [Month/DayM001.WAV], then
[Month/DayM002.WAV]
and so forth.
6.
Pressing the “PLAY/PAUSE” button
during a recording will Pause the recording, pressing the
“PLAY/PAUSE”
button
again will resume the recording.
7.
Press the “RECORD” button
for more than 2 seconds during a recording to stop the recording
and the screen will return to the RECORD Mode.
8.
Recorded audio files can be accessed in the RECORD Mode, or by using the File Navigator.
Sample rate
Channels
2GB
4GB
Low (8KHz)
1 (mono)
128 hrs
256 hrs
Med (16KHz)
1 (mono)
64 hrs
128 hrs
Record Sound
High (32KHz)
1 (mono)
32 hrs
64 hrs
If not enough memory space is available, or the battery power is too low, the T.sonic
™
820
cannot
support the maximum recording capacity as outlined in the above table.
The closer you move the External Microphone to the source of the sound the higher the quality of
the recording.
the recording.
RECORD Functions