Transcend Information T.sonicTM 820 820 사용자 설명서

19 

In the REC INPUT DEVICE Mode select Line-In as the recording device. 

Plug the Line-In cable into the T.sonic

’s Line-In port and connect the other end of the Line-In 

cable to a compatible source device e.g. CD Player. 

Press and Hold the “RECORD” button 

  for more than 2 seconds to begin recording the source 

device using the T.sonic

’s Line-In connection. 

A Recording file is generated and will appear on the screen; this file is saved in the RECORD Mode in 

the [/LINEIN.DIR/] folder. 

 

Files Recorded using the Line-In are named in the order [Month/DayL001.WAV], then 

 and so forth. 

Pressing the “PLAY/PAUSE” button 

 during a recording will Pause the recording, pressing the 

 button 

  again will resume the recording. 

Press the “RECORD” button 

  for more than 2 seconds during a recording to stop the recording 

and the screen will return to the RECORD Mode. 

Recorded files can be accessed in the RECORD Mode, or by using the File Navigator. 

Low (8KHz) 

2 (mono) 

64 hrs 

128 hrs 

Med (16KHz) 

2 (mono) 

32 hrs 

64 hrs 

High (32KHz) 

2 (mono) 

16 hrs 

32 hrs 

 

If not enough memory space is available, or the battery power is too low, the T.sonic

 cannot 

support the maximum recording capacity as outlined in the above table.