Transcend Information T.sonicTM 820 820 사용자 설명서

63 

If a problem occurs with your T.sonic

, please first check the information listed below before taking 

your  T.sonic

 for repair. If you are unable to remedy a problem from the following hints, please 

consult your dealer, service center, or local Transcend branch office. We also have FAQ and Support 
services on our websites. 

®

Go to the Device Manager in the Control Panel and enable the Auto-Insert function for the CD-ROM 
drive. Alternatively, you can manually run the “T.sonic.EXE” file on the software CD. 

Check the following: 

Is your T.sonic

properly connected to the USB port? If not, unplug it and plug it in again. 

Is your T.sonic

 connected to the Mac keyboard? If yes, unplug it and plug it into an available 

USB port on your Mac Desktop. 

Is the USB port enabled? If not, refer to the user’s manual of your computer (or motherboard) to 
enable it. 

Check the following: 

Is the T.sonic

 connected to your computer? If yes, unplug it. 

Is the LOCK switch set to “LOCK”? If yes, set it to the “OFF” position. 

Is the battery out of power? If yes, please recharge the battery. 

, or WAV files to the T.sonic

As required, uninstall and re-install the driver. If this doesn’t work, try Resetting the unit and if this fails, 
please see the “

” section to recover your T.sonic

. 

Is the LOCK switch set to “LOCK”? If yes, set it to the “OFF” position. 

Have you downloaded any music files onto the T.sonic

? If no, then you must first do so from your 

computer or the Internet. (Only Mpeg I Layer 3 and WMA files compressed at a rate of 
32Kbps–320Kbps are supported.) 

Are the earphones properly connected to the earphone jack? If not, reconnect them. 

Is the volume loud enough? If not, increase the volume level until the music can be heard. 

The default language of the T.sonic

 is English. Please set the language option first. 

ID3 tag information has display priority on the screen of the T.sonic

. You could modify the ID3 tag by 

using Windows Media Player or Winamp. 

If the ID3 tag is empty, just the file name will be displayed on the screen.