Technicolor - Thomson DTH223 사용자 설명서

You will be able to solve most problems involving your player by referring to the troubleshooting

guide below.

• Switch the player off and remove the plug from the mains socket.Wait for two minutes,

then plug it in again.

• Check the connections to the mains supply. Is the mains socket live? Check this by

plugging in a table lamp. If necessary, check the plug fuse and the fuse-box.

• The DVD player switches off automatically after 30 minutes if it is not running.To switch

it on again, press the 

button on the front panel of the player.

• In the case of single-sided discs, the disc label must face upwards.
• Check the type of disc you want to play. Check that it is one in the list given on page 10,

or that the format is one that is accepted by the player.

• The DVD player and discs are area coded. If the area code is different, the disc will not be

recognised by the player.The code number for your area is 2.

• Is the disc clean or damaged (is it scratched or marked)?
• If the disc (or the player) has been stored in a cold atmosphere before being installed in a

warmer room, condensation may have formed on the colder parts and interfered with the
running. Immediately unplug the player and wait for the condensation to evaporate
naturally.

• The level of the ratings limit on the disc may be in excess of the limit you set in the

menu. Unlock the player and / or change the ratings limit setting in the menus.

 2_DTH223_en  23/03/04  18:15  Page 28