Technicolor - Thomson DTH223 사용자 설명서

EN

EN

• Select the correct In socket on your TV set.

•

- If you don’t have a Progressive Scan TV or you don’t have the DVD player

connected to the correct Input Jacks, and you activate 

in the DVD

player you won’t see a picture! 
Don’t panic—try the following: first, press the 

button on the front of the

DVD player (it will go to the next video output option, which is an interlace output so a
picture should appear on the TV screen). If that doesn’t work, press and hold 

button on the front of the DVD player for 3 seconds. Now, press the 

button

again (it will go to the next video output option, which is an interlace output so a picture
should appear on the TV screen). As a last resort, you can reset the DVD player to the
factory default settings.

• Ensure that the plugs of the various cables are securely fitted into the sockets.
• If you connect an appliance (such as an amplifier) that includes a DTS or Dolby Digital

decoder, check that the input parameters of the appliance are correctly defined.

• According to the type of connection, select the appropriate setting in the sound menu of

your player and tick the DTS or Dolby Digital options.

• Did you press the key corresponding to the appliance to be controlled (DVD,VCR,TV)? Is

the appliance to be controlled manufactured by a brand other than one in the Thomson
group (Thomson, Brandt, Ferguson, Saba,Telefunken)? 

• Point the remote control unit toward the front of the player.The maximum distance from

which it can be used is 8 metres. Ensure that there is no obstacle (object, animal) between
the remote control unit and the player.

• Remove batteries and hold down one or more keys for several minutes to drain the

microprocessor inside the remote to reset it. Reinstall batteries and try remote again.

• The batteries are fully discharged and must be replaced.When you insert the replacement

batteries, ensure you align their positive and negative polarities correctly (page 2).

• Some functions are not accessible because they depend on the disc playing.

• When the language of subtitles or dialogues is not available on the disc, a default language

is selected automatically.You can select the subtitles or dialogue language through the
information banner (

key) or the language selection menu on the player.

• In 

mode select the 

menu on the DVD player, then the 

function. Select a language from among those available,

.

 2_DTH223_en  23/03/04  18:15  Page 29