Oracom PROFI MX160 사용자 설명서
Fig. 3.9: GPS modul on 2
nd
slot of MR400 modem
Tab. 3.10: GPS module parameters
16 channel, L1 frequency, C/A code
Receiver type
max. 4 times a sec., typiccally 1 s
Location data updating
position 2,5 m, SBAS 2,0 m
Accuracy
hot start < 3,5 s
Start-up times
warm start 33 s
cold start 34 s
aided start 5 s
RMS 50 ns, 99 % < 100 ns
Timing accuracy
NMEA
Protocol
< 20 mA including antenna
Power consumption (for 3 V)
9 600 bps
Signalling rate of module (SPe menu)
Note
The communication protocol, data rate, period of time pulses, and other parameters can be
configured in software, see „MORSE firmware dokumentation
configured in software, see „MORSE firmware dokumentation
3
“
3.7. T-port
(Ethernet to serial)
Use
The Ethernet interface is mounted with a standard RJ45/STP connector. This interface is an Ethernet
(TCP, UDP) to RS232 serial interface converter.
(TCP, UDP) to RS232 serial interface converter.
The module automatically set communication to a speed of 10 or 100 Mbit/s according to the speed of
the network to which it is connected.
the network to which it is connected.
3
https://www.racom.eu/eng/support/firmware/mr400/index.html
17
© RACOM s.r.o. – Wideband modems – PROFI MX160
Connectors