Oracom PROFI MX160 ユーザーズマニュアル

Fig. 3.9: GPS modul on 2

slot of MR400 modem

Tab. 3.10: GPS module parameters

16 channel, L1 frequency, C/A code

Receiver type

max. 4 times a sec., typiccally 1 s

Location data updating

position 2,5 m, SBAS 2,0 m

Accuracy

hot start < 3,5 s

Start-up times

warm start 33 s

cold start 34 s

aided start 5 s

RMS 50 ns, 99 % < 100 ns

Timing accuracy

NMEA

Protocol

< 20 mA including antenna

Power consumption (for 3 V)

9 600 bps

Signalling rate of module (SPe menu)

Note

The communication protocol, data rate, period of time pulses, and other parameters can be
configured in software, see „MORSE firmware dokumentation

“

3.7. T-port

(Ethernet to serial)

Use

The Ethernet interface is mounted with a standard RJ45/STP connector. This interface is an Ethernet
(TCP, UDP) to RS232 serial interface converter.

The module automatically set communication to a speed of 10 or 100 Mbit/s according to the speed of
the network to which it is connected.

https://www.racom.eu/eng/support/firmware/mr400/index.html

Connectors