ONKYO CS-255 사용자 매뉴얼

23

With the Preset Write function, you can manually preset 
individual FM radio stations. Presets make it easy to 
select your favorite stations and eliminate the need to 
tune the radio manually each time you want to change 
stations.

FM stations can also be preset automatically (see 
page 22).

You can store up to 30 FM stations as presets.

Press and hold down the [PRESET 
MEMORY] button to the preset number 
flashes (about 3 seconds).
When the preset has been stored, the preset number 
will change from blinking to steadily lit.
Preset numbers are automatically stored starting 
with the lowest unused number.
If all 30 presets have been set, the display will 
indicate “Preset FULL,” and no further presets can 
be stored. You’ll need to erase an existing preset 
before storing another one.

You must store some presets before you can select them 
(see pages 22 to 23).

Press the [TUNER] button to select “FM”.
Alternatively, you can use the CD receiver’s 
[INPUT] button.
The preset you selected the last time you listened to 
the radio will be selected.

e]/[r] buttons to select a 

preset.
Press the PRESET [

e] button to select the 

previous preset. Press the PRESET [

r] button to 

select the next preset.

Tip:
• If you press the remote controller’s [TUNER] button 

while the CD receiver is on Standby, it will turn on 
automatically and the station that you listened to last 
time will be heard.

RDS can be viewed on this unit only in areas where RDS 
broadcasts are available.

What is RDS?
RDS stands for Radio Data System and is a method of 
transmitting data in FM radio signals. It was developed 
within the European Broadcasting Union (EBU) and 
many European FM radio stations use it these days.

The unit supports and displays Program Service Name 
(PS) and Radio Text (RT) RDS data.

The RDS indicator appears on the display when the unit 
is tuned to an FM station that supports RDS.

Note:
• If the signal from an RDS station is weak, RDS data 

may be displayed intermittently or not at all.

• The message “Waiting” may appear while the PS/RT 

data is being received.

Press and hold down the [CLEAR] button to 
erase the preset (about 3 seconds).
When the preset has been erased, presets following 
the erased preset will be renumbered forward and 
redisplayed.

Frequency and preset number

Program Service Name

Radio Text (if available)