Nuance comm Server D60709-22 사용자 설명서
2 SafeCom Go Sharp - Device server
D60709-22
18
7.
On the device settings page, make sure the settings are correct.
8.
Click Save
2.4.3
Add device via SafeCom Administrator
Before adding a device server device in SafeCom Administrator a SafeCom
Device Server must be added to the SafeCom Administrator in the Device
server container in the left menu.
If the device server is already added in the SafeCom Administrator, go to Add
device server device below.
Add device server
1.
Device Server must be added to the SafeCom Administrator in the Device
server container in the left menu.
If the device server is already added in the SafeCom Administrator, go to Add
device server device below.
Add device server
1.
Start SafeCom Administrator.
2.
Login to the server by double-clicking its group name listed to the left.
Note: In a multi-server installation, best practice is to make sure that
the device server references the slave server.
the device server references the slave server.
3.
Enter User logon (default is ADMIN) and Password (default is nimda).
4.
Right-click the Device servers container and select Add device server...
5.
Enter the IP address or hostname of the device server and if necessary a
note. Click Add.
note. Click Add.
Note: To delete the device server again you right-click the device server and
select Delete device server.
The SafeCom Device Server is now added to SafeCom Administrator and you can
now add a device.