Nuance comm Server D60709-22 사용자 설명서
3 SafeCom Controller
D60709-22
29
3
SafeCom Controller
3.1.1
Installation with SafeCom Controller
1.
Make sure the SafeCom G4 Server software installation has been
completed as described in SafeCom Smart Printing Administrator’s Quick
Guide D10600.
completed as described in SafeCom Smart Printing Administrator’s Quick
Guide D10600.
2.
Connect the SafeCom Controller (3.1.3).
3.
In SafeCom Administrator use Add device (3.1.4) to add the SafeCom
Controller. Remember to select SafeCom Go Sharp as the type of device.
Controller. Remember to select SafeCom Go Sharp as the type of device.
4.
Configure the Sharp web interface (3.2).
3.1.2
Write down the IP address of the device
The IP address can normally be found in the device’s control panel and on the
configuration page. Refer to the device’s manual.
configuration page. Refer to the device’s manual.
IP address /
hostname:
hostname:
Note: The SafeCom Controller MUST reference the Sharp device by a fixed IP
address or a fixed fully qualified hostname. Example: mysharp.safecom.eu.