Nuance comm Server D60709-22 사용자 설명서
3 SafeCom Controller
D60709-22
30
3.1.3
Connect hardware
Make sure that the SafeCom software installation has been completed before
you connect the hardware. When powered up, the hardware automatically
discovers the server software.
you connect the hardware. When powered up, the hardware automatically
discovers the server software.
Figure 1 SafeCom Controller’s rear panel
1.
Switch off the power to the device.
2.
Connect a network cable to the LAN port on the rear panel of the
SafeCom Controller. Connect the other end of the cable to the network.
SafeCom Controller. Connect the other end of the cable to the network.
3.
Connect a network cable to the device. Connect the other end of the
cable to the SafeCom Controller’s other network port.
cable to the SafeCom Controller’s other network port.
4.
Connect the SafeCom Controller and the optional SafeCom Card Reader.
5.
Connect the power supply to the SafeCom Controller. When you power
on, you must wait approx. 1 minute while SafeCom initializes.
on, you must wait approx. 1 minute while SafeCom initializes.
6.
Switch on the power to the device.
2
1
USB host
LAN
network port
network port
power
serial port
test button
USB
device
device