Netgear LG2200D 사용자 가이드
Set Up an Ethernet WAN Internet Connection
130
U.S. Cellular® 4G LTE™ Router (LG2200D)
•
Router’s IPv6 Address On WAN. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
•
Router’s IPv6 Address On LAN. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
6.
In the Password field, enter the password for the ISP connection.
7.
In the Service Name field, enter a service name.
If your ISP did not provide a service name, leave this field blank.
Note:
The default setting of the Connection Mode field is Always On to provide
a steady IPv6 connection. The router never terminates the connection. If the
connection is terminated, for example, when the modem is turned off, the router
attempts to reestablish the connection immediately after the PPPoE connection
becomes available again.
connection is terminated, for example, when the modem is turned off, the router
attempts to reestablish the connection immediately after the PPPoE connection
becomes available again.
8.
Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
LAN) by selecting one of the following radio buttons:
•
Use DHCP Server. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
IPv6 systems might not support the DHCv6 client function.
•
Auto Config. This is the default setting.
9.
(Optional) Select the Use This Interface ID check box and specify the interface ID that you
want to be used for the IPv6 address of the router’s LAN interface.
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
address.
10.
Click the Apply button.
Troubleshoot an Ethernet WAN Internet Connection
Check these possible sources of trouble if you are having difficulty connecting to or browsing
the Internet.
the Internet.
Connect to the Internet
If you cannot connect to Internet, check the following:
1.
The Internet account is active.
If your ISP has provided you with a SIM card and you have not inserted it into the SIM
card slot on the router yet, do so now. For more information, see
card slot on the router yet, do so now. For more information, see