Netgear LG2200D 사용자 가이드

Wireless broadband coverage is available where the unit is located.

Log in to the router and verify that the broadband settings are correct. Check with your ISP 
if you are unsure.

Check the location of the router.

a. Move the router closer to a window for better access to the Internet signal. A Signal 

Quality LED that is off indicates no coverage.

b.  Maintain recommended minimum distances between NETGEAR equipment and 

household appliances to reduce interference.

Adjust the antenna positions.

If your router can obtain an IP address but your computer is unable to load any web pages 
from the Internet:

The traffic meter is enabled, and the limit might have been reached.

By configuring the traffic meter not to block, you can resume Internet access. If you have 
a usage limit, your ISP might charge you for the overage.

Your computer might not recognize any DNS server addresses.

A DNS server is a host on the Internet that translates Internet names (such as www 

addresses) to numeric IP addresses. Typically your ISP provides the addresses of one or 
two DNS servers for your use. If you entered a DNS address during the router’s 
configuration, reboot your computer and verify the DNS address. Alternatively, you can 
configure your computer manually with DNS addresses, as explained in your operating 
system documentation.

Your computer might not have the router configured as its TCP/IP router.

If your computer obtains its information from the router by DHCP,  computer, and verify 
the router address.