Kidde Fire Systems VEGA LT TM0081 사용자 설명서

TM0081      

Page 42 of 51

 Issue 1.01

Installation

1. 

Ensure that the control panel is powered down. Disconnect the stand-by battery and then the mains
supply.

2. 

Install the 44782-K076 card into the plug located on the motherboard card as shown in Figure 35.

Figure 35: Repeater Card Installation

3. 

Secure the card to the earth retaining bar using the single M3 fixing screw.

4. 

Ensure the repeater card plug is fully inserted into the motherboard socket.

5. 

Connect the external transmission cables to the terminals located on the repeater card as shown in
Figure 36 and 37.

Figure 36: Repeater Panel External Wiring - option 1

Figure 37: Repeater Panel External Wiring – option 2

6. 

Set the switches located within each unit as shown on the diagrams above.

7. 

Power up the system. Apply mains supply first followed by the stand-by battery.