Motorola MICOM-2ES/2RS/2TS ALE 사용자 설명서

다운로드
페이지 76
New ALE Features
 
➤ 
To transmit a group call: 
1. Press 
CALL
 (F1). 
The radio displays the last called address. 
If you see the group you want, skip directly to Step 6 
below, otherwise continue as explained below. 
CALL
1001
MOTOROLA
SEND  PAGE  CHAN  
MON
s
 
2.  Select the GRP option as explained on page 32. 
3.  The first group displayed is always group 1. If this is the group you want, 
skip directly to Step 6 below, otherwise press the UP or DOWN arrows until 
you see the desired group. 
4. Press 
PAGE
 (F2) if you want to attach a message to the group call. 
5. Press 
CHAN
 (F3) if you want to initiate the call on a specific channel. 
6. Press 
SEND
 (F1) or 
ENTER
 to initiate the call. 
 
Note
 
•  If the selected group does not include at least 2 stations, your 
request is rejected and you will see for a few seconds AT 
LEAST 2
•  If the addresses in the group have more than 5 different 
leading words, your request is rejected and you will see for a 
few seconds UFA WRONG
 
The radio now starts the link set up process. During this process, you will see 
TO alternating with the number of the channel on which the set up request is 
being sent. 
 
 
Note
 
While the radio is initializing the link, you can press 
STOP
 (F1) 
or 
ESC
 to abort the entire process. 
 
When a net call is transmitted, each member in the 
group responds to the call and the initiator of the call 
receives an indication of the response on the display. 
LINK
1111
MOTOROLA
 
7.  After links have been established, you can start talking. 
8.  To end the call, press 
ESC
END CALLING
MOTOROLA
 
 
_________________________________________________________________________________________________  
 39