Motorola MICOM-2ES/2RS/2TS ALE 사용자 설명서

MICOM-2ES/2RS/2TS ALE Supplement to Owner’s Guide

➤

To define or change a group:

1. Press CALL (F1) and select the GRP option, as you do to start a group call

(page 38).

2. The first group displayed is always group 1. If this

is the group you want, skip directly to Step 3 below,
otherwise press the UP or DOWN arrows until you
see the desired group.

CALL

GRP 1

MOTOROLA

SEND PAGE CHAN SEL

3. To select the stations you want in this group, press

SEL

(F4).

Note

The following example explains how to build a new group, but you
can use the same procedures to change an existing group.

4. After pressing

SEL

(F4), you will see the DIR

screen. Therefore, you can select stations from the
addresses already stored in the directory, or type
new addresses using the keypad.

DIR

1005

MOTOROLA

ADD

PAGE CHAN

To select an address from these already in the directory:

• Use the UP and DOWN arrows to display the desired directory entry,

and then press

ADD

(F1).

The label above the selected entry changes to
ADDED, to indicate that it is now included in
the group.
Now you can also have the option (

ERAS

(F1))

to delete the entry from the group.

ADDED

1007

MOTOROLA

ADD

ERAS

CHAN

Note

If adding the station would cause the
total length of the station addresses in
the group to exceed 12 ALE words, then
after pressing

ADD

(F1) you will see

BUFF FULL and the process stops.

GROUP

BUFF FULL

MOTOROLA

ADD ERAS CHAN OKs

• Repeat the procedure described above until the

group includes only the desired stations.

_________________________________________________________________________________________________