Maxon Telecom WL7-VERS. C 사용자 설명서

33

11921 Slauson 

A

ve.  Santa Fe Springs, CA.  90670  (800) 227-41

16  F

AX (888) 771-7713

NOTE:  If there is a grounding 

point on the frame, use it 
to connect ground cable. 
Skip step 8. 

8. Extend the ground cable to reach 

vehicle frame (FIG. 33-2). Con-
nect to an existing grounding point 
if available. If necessary, drill a 
13/32” (0.406”) hole in vehicle 
frame for bolting the ground cable 
terminal lug (FIG. 33-2).

7. Uncoil the ground cable from the bottom of 

the pump cover. Route the ground cable 
on the Lift through grommet in vehicle fl oor 
(FIG. 33-1A & 33-1B).

9. Bolt the ground cable terminal lug 

to vehicle frame as shown in FIG. 
33-2.

NOTE:  Clean the ground cable 

connection point on the 
frame down to bare metal. 

NOTE:  Apply dielectric grease to 

all electrical connections.