LXE VX7 E-EQ-VX7RG-D 사용자 설명서

다운로드
페이지 250
PCMCIA, CF and SD Slots 
51 
E-EQ-VX7RG-D 
VX7 Reference Guide 
PCMCIA, CF and SD Slots  
The VX7 has two PCMCIA slots, one Compact Flash slot and one Secure Digital slot.  The 
PCMCIA slots are stacked on top of each other and located on the right hand side of the opening.  
The PCMCIA slots support the Personal Computer Memory Card International Association 
(PCMCIA) 2.1 standards.   The upper slot is designated as Slot A and the lower slot is designated 
as Slot B.   
Slot A accepts Type I or II PCMCIA cards.  If a radio card is used, it must be installed in Slot A to 
prevent damage to the internal radio cables.  LXE supports only Type II 2.4GHz Spread Spectrum 
radios. 
Slot B accepts Type I or II PCMCIA cards. 
The PCMCIA slots may be disabled by the user.  To enable or disable a PCMCIA slot, select 
Start | Settings | Control Panel |PCMCIA icon. 
The center slot is a Compact Flash slot, containing the CF ATA hard drive.   This drive contains 
the operating system and settings. 
The left slot is used for Secure Digital (SD) memory cards. 
SD
CF ATA
PCMCIA  A
PCMCIA  B
2
1
3
4
1.  SD Card Slot  
2.  Compact Flash Hard 
Drive 
3. PCMCIA 
Slots 
Figure 2-39  The PCMCIA and ATA Slots 
PCMCIA Slots 
Slot A and B PCMCIA Card Management is handled by Microsoft Windows CE .NET.  The 
PCMCIA cards are Plug and Play devices and can be “hot swapped”.  For more details, refer to 
the Windows CE .NET help screens or refer to the documentation delivered with the PCMCIA 
card. 
Note:  Although cards in the PCMCIA slots may be hot swapped, the VX7 is not 
environmentally sealed while the access panel cover is removed to hot swap PCMCIA 
cards.