LXE VX7 E-EQ-VX7RG-D 사용자 설명서
PCMCIA, CF and SD Slots
53
E-EQ-VX7RG-D
VX7 Reference Guide
Install PCMCIA Cards
Equipment Needed: Phillips No. 1 screwdriver and a Torque wrench capable of measuring to 9±1
inch pounds (1.016±.11 N/m).
inch pounds (1.016±.11 N/m).
Note: The example below details installing a 2.4GHz radio card. Installation of other
PCMCIA cards is similar, except there is no antenna.
Install the 2.4GHz Type II PCMCIA Radio
Caution
!
The LXE Model VX7 Vehicle Mount Computer is specifically for use with LXE
Model 6726, 6816 and 6830 2.4GHz Type II PCMCIA radios. Substitution of
other PCMCIA radios will void the FCC, Industry Canada and other
international radio certifications for the Model VX7 Vehicle Mount Computer
and is strictly prohibited.
Model 6726, 6816 and 6830 2.4GHz Type II PCMCIA radios. Substitution of
other PCMCIA radios will void the FCC, Industry Canada and other
international radio certifications for the Model VX7 Vehicle Mount Computer
and is strictly prohibited.
1.
Turn the VX7 off and detach the power cable.
2.
Loosen the three (3) Phillips head screws securing the access panel cover so the cover can
be removed. The screws are a captive part of the cover and cannot be removed.
be removed. The screws are a captive part of the cover and cannot be removed.
Partially insert the 2.4GHz Type II PCMCIA Radio into Slot A (the upper right slot).
Caution
!
Slot A MUST BE used for the radio card. Installing a radio card in Slot B can
result in pinching or other damage to the internal antenna cable.
result in pinching or other damage to the internal antenna cable.
SD
CF ATA
PCMCIA A
PCMCIA B
PCMCIA B
Radio Card
Figure 2-40 Inserting the 2.4GHz Type II PCMCIA Radio
Note:
The tethered access panel cover is not shown in the illustration above.