Intermate 100 사용자 설명서
Intermate100 and Intermate101 Print Server Administration Manual
95
IP Assignments for Initial Contact: Assignment Using RARP
12.5.
Assignment Using RARP
1
Power Off the Intermate1xx. If the unit is attached to a printer,
it is best that the printer is powered On.
it is best that the printer is powered On.
2
Add the following lines to the [ /etc/ethers ] file or
[ /etc/rarpd.cf ] file: Note that the MAC address is written
with colons : as separators between every two characters.
[ /etc/rarpd.cf ] file: Note that the MAC address is written
with colons : as separators between every two characters.
[ /etc/ethers ] file
<Hardware address> <Host name>
(syntax)
00:c0:a2:00:80:1e ima101-a
(example)
Or
[ /etc/rarpd.cf ] file
<IP address> <Hardware address>
(syntax)
192.168.0.227 00:c0:a2:00:80:1e
(example)
c
Update your host table and alias name data
bases.
bases.
d
Start the RARP daemon, if it is not already
running.
running.
rarpd -a
3
Make sure the Intermate1xx is attached to the LAN and
power it on.
power it on.
4
Connect and Login to the unit with the tool of your choice.
5
Choose [TCP/IP].
a
Disable BOOTP and check to be sure that
DHCP is still disabled.
DHCP is still disabled.
b
If it is not possible for Intermate1xx to obtain
the mask from the network, you must type in a
Subnet Mask.
the mask from the network, you must type in a
Subnet Mask.
c
If automatic routing (RIP) is not used in your
environment, type in the Default Gateway.
environment, type in the Default Gateway.