Intermate 100 사용자 설명서
Intermate100 and Intermate101 Print Server Administration Manual
97
IP Assignments for Initial Contact: Assignment Using DHCP
12.6.
Assignment Using DHCP
1
You must first assign an address statically using ARP and
PING or the IMCU, as described in one of the sections
below. When you continue from there, do the following:
PING or the IMCU, as described in one of the sections
below. When you continue from there, do the following:
2
Connect and Login to the unit with the tool of your choice.
3
Choose [TCP/IP].
a
Disable BOOTP and RARP. Enable DHCP.
b
If it is not possible for Intermate1xx to obtain
the mask from the network, you must type in a
Subnet Mask.
the mask from the network, you must type in a
Subnet Mask.
c
If automatic routing (RIP) is not used in your
environment, type in the Default Gateway.
environment, type in the Default Gateway.
d
.
4
Save your work and reboot. You can, of course, wait to
reboot until finishing other configurations you want to make.
reboot until finishing other configurations you want to make.
5
Remember to coordinate things with your network
administrator so that the host name gets registered in an
appropriate DNS table.
administrator so that the host name gets registered in an
appropriate DNS table.