Hughes HN7700S 사용자 설명서
Chapter 4 • Connecting the HN router to a transport device
1037753-0001 Revision A
15
Chapter 4
Connecting the HN router to a transport
device
This chapter explains how to connect the HN router to a transport
device. It covers the following topics.
device. It covers the following topics.
• Connecting the cables to a T-1 transport device on page 16
• Powering up and observing the router LEDs on page 16
• Powering up and observing the router LEDs on page 16
Connecting the cables
to a modem transport
device
to a modem transport
device
To connect the modem transport device:
1. Connect the installer PC to LAN 1 with an Ethernet cable.
2. Connect the modem to LAN 2 of the router with an Ethernet
2. Connect the modem to LAN 2 of the router with an Ethernet
cable.
3. Make sure that neither the router nor the customer’s computer
are connected to an Ethernet router or switch.
4. Connect the power cables.
Note:
Do not connect any devices to the HN router at this
time. Serial and Ethernet devices may only be connected to
the remote terminal after it is installed and commissioned.
the remote terminal after it is installed and commissioned.